How to Read Beretta Mobil Chock Tubes

There are several chokes available for Beretta shotguns, how can you identify the right 1? In fact, it is non that hard as each shotgun just have one "Family" of chokes in simply one Gauge, inside those you tin choose any model that you similar the most (model examples: flush, extended, ported, blackness edition, etc.)

For improve explain, hither the main variants of the fundamental data you lot need:

• "Family": Mobile-Asphyxiate, Optima-Asphyxiate, Optima-Choke Plus, Optima-Choke HP (latest model developed)
• Gauge: 12, 20, 28, .410

In the post-obit paragraphs, y'all volition detect the all-time methods to identify the "Family unit" of chokes compatible with your shotgun (Estimate is considered known by the possessor). Those apply independently if they are Overe&Under, Semiauto or SideBySide

1. VISUAL METHOD

The fastest fashion to identify the "Family unit" is to accept down i asphyxiate you are currently using on your shotgun, make clean information technology and cheek the markings on the side of the choke, hither an example:

In the example image, you see an Optima-Choke HP Choke

Note: Mobile-Choke "Family" could also be marked as "Atomic number 82" or "ST"

Found? Select yours:   Mobil-Choke    Optima-Choke    Optima-Choke Plus    Optima-Asphyxiate HP

Not Found? Bank check side by side method!

two. CHOKE MEASUREMENT METHOD

For this method, you volition only need your current flush choke and check the measurement from the ending of the thread to the end choke (for extended choke, consider from end of thread to the finish of the part inside of the barrel) :

Found? Select yours:   Mobil-Choke    Optima-Choke    Optima-Choke Plus    Optima-Choke HP

Not Found? Check side by side method!

three. BARREL MARKINGS METHOD

For this method, you will only need your shotgun andbank check the markings near the Approximate mark:

Found? Select yours:   Mobil-Choke    Optima-Asphyxiate    Optima-Asphyxiate Plus    Optima-Choke HP

Not Found? Check side by side method!

4. Series NUMBER METHOD

If nothing else works, we can obtain the right choke "Family" from the serial numbers nowadays on your shotgun. In social club to practice so, you need to send us an email with both:

• Shotgun serial number
• Barrels serial number

We will respond as presently as possible, typically a couple of working days. To send an e-mail, use the form at the following link and insert all the info required (in improver to the 2 serial numbers) :

https://estore.beretta.com/en-european union/contact-usa/

Or send an email at:

estore@beretta.com

Note: The privacy consent to the processing of personal data is implicit in the use of the service

Thanks for contacting u.s.!

ARE Yous INTERESTED IN CHOKE TUBE HYSTORY? READ MORE!

1980s: IT ALL STARTED WITH THE MOBIL-Asphyxiate

Introduced in the mid 1980'southward the Mobil-Choke tube organization was first bachelor for the model S687L Over&Nether and later carried through virtually every model of fixed breech and semi-automated shotgun. At this time, the Mobile-Choke was the merely choke tube system adapted by Beretta to 12, 20, 28 and .410 judge. The Mobil-Choke system continues to exist the mainstay of the 680 series field grade Over&Under shotguns.

The iconic parallel design of the Beretta choke tubes creates a more gradual taper inside which gently transitions into a parallel section that runs to the muzzle finish of the tube. The parallel design results in reduced shot deformation, improved blueprint uniformity and increased pattern density.

2000: Development BRINGS TO THE OPTIMA-CHOKE

In the twelvemonth 2000 Beretta introduced the 12-gauge Optima Diameter butt design into some of our contest shotguns. This new butt utilized a larger internal bore dimension known to some as "dorsum-ho-hum" and required a new choke tube design to give the proper constrictions.

The Optima barrels can be identified by locating the messages "OB" stamped next to the barrel gauge stamp. Barrels marked with the "OB" stamp will apply the Optima-Choke "Family unit". This blueprint features a longer internal transition taper into the choke constriction, making the overall length of this tube longer than the original Mobil-Choke tube.

2003: EXTREME Use CREATES OPTIMA-CHOKE PLUS

With the introduction of the model 391 Xtrema shotguns in 2003 the Optima butt configuration was added into the 391 12-estimate line of field shotguns.

In order to handle a higher book of steel shot shells used in field hunting, the Optima-Choke tube was revised and manufactured with a thicker wall size.

This revised choke tube was named the Optima-Choke Plus and featured the same Optima-Asphyxiate internal dimensions and performance but has a larger exterior diameter and revised thread location.

2008: OPTIMA-Asphyxiate HP NEW LEGACY

With the introduction of the SV-ten Perennia and Prevail Series Over&Nether shotguns in 2008 a third Optima-Bore choke configuration was added, the Optima-Choke HP.  Every bit noted above nether the Optima-Asphyxiate Plus section, the extended use of high operation steel and metal blend non-toxic shot imparts considerable stresses. In the case of the Optima-Choke Plus function of the solution was to utilise a choke tube design offering a thicker choke tube wall to amend resist these forces. This in turn results in a heavier, larger diameter barrel.

One of the principal objectives in designing the Optima-Choke HP (OB HP) system was to develop a choke tube system that would withstand the rigors of the extended use of heavy payloads of steel/metallic blend shot while being able to retain the weight saving and handling characteristics of the lighter Optima-Choke barrel profile. To reach this Beretta engineers designed a choke organisation locating the threaded portion of tube a nominal ten mm (.394 inch) further to the rear of the muzzle cease of the tube. This effectively created an increase in wall thickness at the muzzle end of the choke tube where the greatest caste of asphyxiate constriction typically occurs and stresses are the highest without having to use the larger barrel profile.

At today (2018), all new Beretta shotguns are fabricated to use the Optima-Choke HP chokes, equally they represent the near avant-garde technological solution to every demand the shooter may face up.

How to Read Beretta Mobil Chock Tubes

Source: https://estore.beretta.com/en-eu/documents/beretta-choke-tubes-guide/

Share this post